Carbon Dioxide Regulators -
With single stage chrome brass barstock body, 316L stainless steel diaphragm, and electric heating, the 3008 Series regulators are specially designed to prevent freeze-up problems associated with high flows of carbon dioxide and nitrous oxide during continued use.
Dewar Regulators -
With single stage chrome-plated machined brass body and a 316L stainless steel diaphragm, the 2006 Series regulators are intended for primary pressure control of gases supplied in cryogenic liquid cylinders.
High Flow Regulators -
With brass barstock, stainless steel bodies and 316 stainless steel diaphragms, the four-port 4083 and 4084 Series Line Regulators and six-port 4085 and 4086 Single Stage Series Regulators can be used in many different applications including high flow purging, semiconductor manufacturing, manifolds and line regulation.
High Pressure Regulators -
The nickel-plated brass 4092 and 316 stainless steel 4093 Series regulators are intended for primary pressure control of non-corrosive gases at a maximum inlet pressure of 6000 psig.
The 145 Series special purpose piston regulator is designed for applications requiring inlet pressures up to 6,000 psi. The piston design requires little or no maintenance.
Lecture Bottle Regulators -
With single stage chrome-plated brass and stainless steel barstock bodies and 316L stainless steel diaphragms, the 3025 and 3026 Series regulators are specifically designed for use with corrosive and non-corrosive gases in lecture bottles.
Low Flow Regulators -
The 170 Series low pressure line regulators are designed to allow for lower inlet pressures and to provide sensitive and accurate pressure control of non-corrosive gases at low outlet pressures. The large rubber diaphragm delivers a steady flow at pressures below 10 psig and the 2-1/2” inch pressure gauge makes outlet pressure setting easy and accurate.
Purge Assemblies – 5002 Series -
The 5002 Series purges are designed for use with high purity gases to insure system integrity upon breakdown of components or during gas source changes. Most commonly, these purge assemblies are used with pressure control devices as an integral option or can be used within gas delivery systems to isolate pressure or flow control equipment.
The 5002 Series purges are offered in brass and stainless steel with diaphragm packless valves. Optional testing can be provided to certify that these purge assemblies are helium leak-tight for the most demanding services. These devices are intended for use with chemicals that are compatible with the listed materials.
General Purpose Regulators -
These regulators are intended for pressure control of laboratory gases with applications requiring constant delivery pressure, regardless of supply pressure.